| Class 3000 | |||
| NPS | A | B | C |
| 1/2 | 1 25.40 | 1.13/32 35.71 | 15/16 23.81 |
| 3/4 | 1.1/16 26.98 | 1.23/32 43.65 | 1.5/32 29.36 |
| 1 | 1.5/16 33.33 | 2 50.8 | 1.7/16 36.51 |
| 1¼ | 1.5/16 33.33 | 2.9/16 65.08 | 1.3/4 44.45 |
| 1½ | 1.3/8 34.92 | 2.27/32 72.23 | 2 50.8 |
| 2 | 1½ 38.1 | 3.15/32 88.10 | 2.9/16 65.08 |
| 2½ | 1.13/16 46.03 | 4.1/16 103.18 | 3 76.2 |
| 3 | 2 50.80 | 4.13/16 122.23 | 3.11/16 93.66 |
| 3½ | 2.1/8 53.975 | 5.7/32 132.55 | 4 101.6 |
| 4 | 2¼ 57.15 | 5.31/32 151.60 | 4.3/4 120.65 |
| 5 | 2.5/8 66.67 | 7.5/16 185.73 | 5.9/16 141.28 |
| 6 | 2.3/4 69.85 | 8.5/8 219.07 | 6.11/16 169.86 |
| NPS | A | B | C |
| Class 6000 | |||
| NPS | A | B | C |
| 1/2 | 1¼ 31.75 | 1.23/32 43.65 | 3/4 19.05 |
| 3/4 | 1.7/16 36.51 | 1.61/64 49.60 | 1 25.4 |
| 1 | 1.9/16 39.68 | 2.7/16 61.91 | 1.5/16 33.33 |
| 1¼ | 1.5/8 41.27 | 2.23/32 69.05 | 1½ 38.1 |
| 1½ | 1.11/16 42.86 | 3¼ 82.55 | 1.15/16 49.21 |
| 2 | 2.1/16 52.38 | 4.1/32 102.39 | 2.3/4 69.85 |
| NPS | A | B | C |
General notes:
- Dimensions: Top Row in Inches / Bottom Row in millimeters.
- Root Gap – X – “Space” for welding the O’let is raised off the run pipe to establish proper weld gap by placing spacers, e.g. welding rods, under the fitting. This provides a uniform welding gap between the curvature of the run and base of fitting.
- Threaded Ends are in accordance with ASME B1.20.1. Design per MSS SP-97.
- Source comes from Bonney Forge (except the sizes in millimeters).
- Thredolet� is a registered name. Another often used name is Threaded Outlet.
Reviews
There are no reviews yet.